Etnyre Asphalt Distributor Rentals · Texas
Etnyre 2,000-gallon Black Topper units delivered to your Texas job site. Chip seal, fog seal, tack coat, prime coat. TxDOT-ready. Call or fill out the form — we respond same day.
Fastest response — call direct
Get your rate — same day response
Mon–Sat · 6AM–6PM · No obligation
Etnyre Black Topper asphalt distributors — inspected, tested, and ready for your Texas job site. Photos of our actual fleet coming soon.
The Etnyre Black Topper is the benchmark in asphalt distribution. Precision spray bars, consistent application rates, and proven reliability on everything from Texas county chip seal to TxDOT highway fog seal. Our fleet is maintained to manufacturer specs and ready to work anywhere in the state.
Tank Capacity
2,000 Gal
Our standard fleet runs 2,000-gallon tanks — the right volume for most county road, chip seal, and overlay tack coat projects.
Spray Bar Width
12–24 ft
Hydraulic full-circulating spray bars available in multiple widths. Confirm your required coverage width when booking — bar width determines how many passes your job needs.
Transmission
Manual / Auto
Manual transmission for experienced operators who want precise ground speed control during spraying. Automatic available for crews who prefer it. Specify at booking.
Application Rate
0.01–2.5 gsy
Full-range rate control for prime coat, tack coat, chip seal, and fog seal applications.
Heat System
Diesel or Propane
Choose diesel-fired or propane-fired heat. Both deliver full-circulation heating to maintain material temperature and consistent application viscosity. Specify your preference when booking.
Computer Controls
Optional
Etnyre computerized control systems available for precise metered application on critical projects.
When you call or submit a quote: Let us know your required spray bar width, whether you need manual or automatic transmission, and your heat system preference. These three specs determine which unit we match you with.
Our Etnyre 2,000-gallon units are configured and optimized for asphalt emulsions and cutback asphalts — the materials that make up the vast majority of Texas chip seal, fog seal, tack coat, and prime coat work. Hot bituminous materials (AC grades, PG binders, AR-4000) operating above 275°F are outside the designed operating range of our rental fleet. We will rent to customers intending to use high-temperature materials, but we strongly advise against it. Performance will be compromised, spray bar failures are likely, and the renter bears full liability for any equipment damage resulting from high-temp material use.
SS-1 / SS-1h
Slow-Set Emulsion
RS-1 / RS-2
Rapid-Set Emulsion
CRS-2 / CRS-2P
Cationic Rapid-Set
MC-30 / MC-70
Medium Cure Cutback
RC-250
Rapid Cure Cutback
AC-10 / AC-20
Asphalt Cement
PG 64-22 / PG 70-22
Performance Grade Binder
AR-4000
Aged Residue Binder
Etnyre distributors handle the full range of bituminous spray applications. If your project involves liquid asphalt on pavement, we have the equipment.
Apply emulsified asphalt as a binder coat before aggregate spreading. Ideal for county roads, rural highways, and parking lot preservation. Etnyre spray bars deliver precise coverage rates for uniform chip retention.
Bond new asphalt overlays to existing pavement layers. Our distributors apply RS-1, SS-1, and CRS-2 emulsions at controlled rates, ensuring proper interlayer adhesion for longer-lasting overlays.
Penetrate and stabilize aggregate base before asphalt paving. Distributor-applied MC-30 or SS-1h prime coat locks the base and provides a bonding surface for the structural layer above.
Rejuvenate oxidized pavement surfaces and extend pavement life without aggregate. Low-volume asphalt emulsion applications slow surface raveling on aging roads between scheduled overlays.
Apply tack or prime before micro-surfacing operations where precise rate control is critical to mix adhesion. Our computerized units deliver the consistency your spec requires.
Apron sealing, taxiway maintenance, large parking lot preservation, and industrial pad sealing. We can configure equipment for DOT airport projects and private industrial sites.
We keep the rental process simple. You focus on the project — we handle the equipment.
Fill out the form or call us. Tell us your material, acreage, start date, and location. We'll recommend the right unit and give you a firm rate — same day.
Review your rental agreement and lock in the equipment. A $5,000 non-refundable cleaning fee is due upfront before delivery on every rental. We inspect and prep the unit to your specs before it leaves our yard.
We coordinate transport of the distributor to your job site on schedule. A full equipment walk-through is included so your crew is ready to work from day one.
When your project wraps, we schedule pickup. No hassle, no hidden return fees. Just call us and we'll handle the logistics.
Ready to book? We respond same day.
Units available now across Texas. Call or send your name and number.
We're not a general equipment rental company that happens to carry a distributor. Asphalt distribution equipment is our specialty — 2,000-gallon Etnyre units, diesel or propane, ready to work anywhere in Texas. Here's what that means for you.
Every unit is cleaned, inspected, and spray-bar tested before every rental. We won't put you on the road with a distributor that hasn't been through our checklist. Downtime on your job is lost money — we take that seriously.
Have a question about application rates, nozzle selection, or material temperature? Our team has worked with asphalt distributors for decades. Call us on the job and get a real answer, not a 1-800 number transfer.
We arrange transport of the distributor to and from your job location anywhere in Texas. West Texas ranch roads, Panhandle county routes, Gulf Coast overlays, Hill Country chip seal — if it's in the state, we've delivered there.
All rentals start at a one-month minimum, with daily and weekly rates available after that. Clear terms, no hidden add-ons — just straightforward pricing built around how road work actually runs.
Our distributors meet TxDOT specifications and carry current certifications. Paperwork is in order before the unit leaves our yard so you're never stuck on a Texas job site with a compliance problem.
Some jobs call for propane; others run better on diesel. We stock both. Tell us your preference at booking and we'll match you to the right unit. Either way, you get the same full-circulation heating performance.
Straight answers to what contractors ask us most. Tap any question to expand.
Our fleet is optimized for asphalt emulsions (SS-1, SS-1h, RS-1, RS-2, CRS-2, CRS-2P) and cutback asphalts (MC-30, MC-70, RC-250) — the materials used in the overwhelming majority of Texas chip seal, fog seal, tack coat, and prime coat work. Hot bituminous materials including AC grades, PG binders, and AR-4000 operating above 275°F are outside the configured operating range of our units. We will rent to customers using these materials, but we strongly advise against it. Performance will be compromised and the renter assumes full liability for any spray bar failures or equipment damage caused by high-temperature material use.
Yes. Operating the distributor truck on Texas public roads requires a valid Commercial Driver's License (CDL). Class requirements depend on the truck's GVWR. Confirm requirements with the Texas Department of Public Safety (DPS) or your TxDOT project contact prior to booking.
All rentals have a one-month minimum. After the initial month, daily and weekly rates apply so you're only paying for the time you need. We don't lock you into longer commitments than your project requires.
A $5,000 non-refundable cleaning fee is required upfront before every rental delivery. This covers the full post-rental cleaning, tank flush, and system purge when the unit is returned. It is non-refundable and collected prior to equipment dispatch — no exceptions.
The monthly rental rate covers the 2,000-gallon Etnyre unit, pre-delivery inspection, standard nozzle set, and equipment return pickup. Delivery transport and fuel are quoted separately based on your Texas job site location.
We stand behind our fleet. If a mechanical issue arises due to equipment condition (not operator error or misuse), we troubleshoot remotely first, then dispatch support. Your project shouldn't sit idle — that's our commitment to you.
It depends on your fuel access on-site and any local regulations. Propane units are popular on jobs near structures or in areas with diesel restrictions. Diesel-fired units are standard for open road work. Our team can help you choose if you're not sure — just ask when you call.
We recommend at least 5–7 business days. During peak chip seal season (spring and fall), 2–3 weeks advance notice is strongly advised to guarantee your preferred heat system. Call us and we'll check availability right away.
Units are available now. Call us and we'll have your rate in minutes — or send your number and we'll call you.
Mon–Sat · 6AM–6PM · No obligation · Same-day response